1. Product Introduce
The CO2 transmitter uses the principle of non-dispersive infrared (NDIR) to detectthe presence of CO2 in the air. It combines mature infrared absorption
gas detection technology with precise optical path design and sophisticated circuitdesign, and has a built-in temperature sensor for temperature
compensation has good selectivity, no oxygen dependence, and long service life.
2. Product Features
1. High sensitivity and high resolution
2. Low power consumption and fast responsetime
3. Temperature compensation, excellent linearoutput
4. Excellent stability
5. Long service life
6, anti-water vapor interference
3. Product application
Can be widely used in HVAC and indoor air quality monitoring, industrial process and safety protection monitoring, small weather stations, agricultural
greenhouses, environmental computer rooms, grain depots,aquaculture, flower farming, commercial building control, office buildings,schools, conferences
Monitoring of CO2 concentration in production processes of rooms, shopping malls, restaurants, gyms, cinemas and animal husbandry.
4. Product Parameter
Ø Measurementparameters: carbon dioxide concentration
Ø Measurerange: 0~2000ppm;0~5000ppm; 0~10000ppm(Optional)
Ø Averagecurrent: peak ≤200mA; average 85 mA
Ø Warm-uptime: 3min
Ø Responsetime: <90s
Ø Accuracy:± 50ppm + 3% F • S (25 ℃)
Ø Powersupply voltage: 6 ~ 24V (when the outputsignal is RS485, 0.4 ~2V)
Ø 12~ 24V (when the output signal is 0 ~ 5V, 0 ~ 10V, 4 ~20mA)
Ø Workingtemperature: 0 ℃~50 ℃
Ø Operatinghumidity: 0 ~ 95% RH
Ø Temperaturedrift: 0.2% F • S / ℃
Ø Stability:≤ 2% F • S
Ø Repeatability:≤ 1% F • S
Ø Note:In order to ensure the normal operation of the sensor, the power recovery timeof the sensor must be less than 50mS
ØImpedancerequirements for current signals
Supply Voltage | 9V | 12V | 20V | 24V |
Maximum impedance | 125Ω | 250Ω | 500Ω | >500Ω |
5. Product size